The new magnetic sensor programmer (MSP) V1.0 replaces APB 1.5, forming a complete programming tool series for Micronas products.
Suitable for HAL 18xy, HAL/R 24xy, HAL 28xy and HAL/R/C 37xy series products.
MSP V1.0 can drive high voltage and operate the latest new generation sensors with PSI5 output.
TDK has expanded the programming tool chain, and the Magnetic Sensor Programmer (MSP) V1.0 can easily program a variety of Micronas products. MSP V1.0 replaces APB 1.5 and other existing programming tools, which integrates USB-Programming Kit V1.01 and HAL APB V5.1. This programmer is especially suitable for development laboratories. TDK now has three tools to support all Micronas programmable sensors. From mid-September, MSP can be ordered through the listed sales offices or agents of TDK-Micronas.
MSP is applicable to all products of HAL 18xy, HAL/R 24xy, HAL 28xy, HAL/R/C 37xy, as well as the new angle sensor products that will be launched next. These products are mainly used for position detection and angle measurement applications in automobiles, such as throttle valve, accelerator pedal, EGR valve, neutral detection, transmission gear sensor, folding car lights and steering wheel angle applications. In addition, in the field of industrial electronics, programmable linear sensors HAL 18xy and HAL 24xy are used for current measurement, joysticks, rocker switches, and various extended position measurement requirements.
In order to optimize the system performance of the above-mentioned applications, a single sensor needs to be programmed. To this end, TDK provides corresponding hardware and software. Compared with previous generation products, MSP can drive higher current and can operate the latest Micronas sensors with PSI5 output. Through its RS-232 or USB interface, MSP can be easily connected to a computer. TDK provides special software to support the command interface for communication with the computer. Support specific computer software for engineering or development purposes. Programmable Hall sensors have special software to provide a graphical user interface based on LabViewTM. Customers currently using APB 1.5 can easily switch to MSP because it is compatible with previous software. This simple programming method provides customers with improved production efficiency and optimized sensor performance.
The software for each series of sensors is provided free of charge. After the user has registered, it can be downloaded from the TDK-Micronas online service port service.micronas.com.
the term
MSP = Magnetic Sensor Programmer
EGR = exhaust gas recirculation
APB = Application Board
PSI5 = Peripheral sensor interface, used in automotive electronics, connecting peripheral sensors and electronic control units with two wires
RS-232 = recommended standard 232 (V24), data transmission serial communication standard
main application
Programming of HAL 18xy, HAL/R 24xy, HAL 28xy, HAL/R/C 37xy
Main features and advantages
Programmable latest sensor with PSI5 output
Compatible with previous versions of software
Replace APB 1.5
USB Printer Cable USB Printer Cord USB 2.0 Type A Male to B Male Scanner Cord High Speed for HP, Canon, Dell, Epson, Lexmark, Xerox and More
USB C Printer Cable USB B to USB C Cable Nylon Braided, 2.0 High-Speed Printer Cord for MacBook Pro/Air, USB C MIDI Cable Compatible for Casio Digital Piano MIDI Controller
Printer cord connects USB-C enabled devices (MacBook Pro, Surface Book 2, Chromebook Pixel. etc) to USB 2.0 Type B devices and peripherals, USB 2.0 B male is Target side, compatible with USB Type B port(Legacy Printers, Multifunction, Laser or Thermal Printer, Desktop Document Scanner, Yamaha Casio Digital Piano, MIDI-Controller, Electric Keyboard, etc.)
USB2.0 High-Speed 480Mbps Transfer: This printer USB B to USB C cable supports High-Speed data transfer/syncing up to 480 Mbps, and is backward compatible with Full Speed USB 1.1 (12 Mbps) and Low-Speed USB 1.0 (1.5 Mbps) standard devices, providing more stable, faster and more secure data transfer than a WIFI connection, improving your work efficiency.
Gold Plated Plug, Stable & Clear Printing: The printer usb c cable is constructed with anti-oxidation high purity copper wire with an increased number of cores and shields and the interface of this USB b to USB c cable uses100% contact gold plating process technology, providing better transmission performance against EMI/RFI noise, enjoy stable and clear printing results. Plug and play, don`t need to install any plugins and check the cable orientation, convenient and fast.
SR Design &10X Durable Cable: UCOAX USB C to USB B printer cable features abrasion-resistant double-braided nylon fiber jacket and aluminum alloy casing to increase corrosion-resistant, passed the printer cable 40,000+ times bend test, making the cable more durable, and sturdier for a longer lifespan, ensuring that customers can achieve the purpose of "NEVER CHANGE THE CABLE"
Wide Compatibility: The USB Type C port Male is Host side, compatible with Dell XPS 13/XPS 15, MacBook Pro, MacBook Air, iMac 2017, iMac ProChromebook Pixel, DELL XPS, HP Spectre, ThinkPad T570, YOGA 900, HUAWEI MateBook and so on. USB B 2.0 port can be compatible with HP Deskjet 2540 / 3630, HP Officejet 5740, HP Envy 4527 / 4520 / 4523 / 5540, Canon MG5750 / MG3550 / MG7550, Epson XP225 / XP245 / XP425, Brother DCP-L2520DW, Lexmark MX310DN, Dell C2665DNF, Samsung Xpress SL-C1860FW, etc.
PROFESSIONAL SUPPORT: UCOAX is a brand that focuses on usb cable. We provide valid technical support for 2 years.
Printer Cable,USB Printer Cable,USB 2.0 Cable,Type A Male to B Male Cord,USB B Cable for HP
UCOAX , https://www.jsucoax.com