Wide motor top box
Guangguang STB is a CATV conversion device and is a conversion device operated by the Radio and Television Bureau that converts digital TV signals into analog signals. It decodes and restores the digitally compressed image and sound signals to generate analog video and sound signals. This is a method used by many households before.
The TV box TV box can be used as a small terminal device that runs an Android system without a display screen. Simply connect it to a traditional TV via technologies such as HDMI or color-difference lines to enable network video playback, application installation, and even the ability to project photos and videos from your phone or tablet to your home screen. Among televisions, it is the most popular one.
The TV box is loved by many young people. You can install various apps on your TV to watch the videos you want, and get rid of the regret caused by the poor viewing experience of mobile phones and computer screens.
IPTV
IPTV is an interactive network television and is mainly operated by telecom operators. It is a kind of new technology that uses broadband network and integrates Internet, multimedia, communication and other technologies to provide home users with multiple interactive services including digital television.
In addition to the advantage of the TV box, IPTV basically does not get stuck when watching live broadcasts, but it will charge an annual fee that is not low.
Smart TVs Smart TVs are generally equipped with an operating system. Users can install and uninstall various types of application software while enjoying normal TV content, and continue to expand and upgrade their new TV products. Smart TVs can continue to provide users with a rich and personalized experience that is different from using cable digital TV set-top boxes.
Smart TV is basically a TV + TV box function, so the user must not buy duplication, you buy a smart TV, networking can watch TV, generally do not need to be equipped with a separate TV box, and smart TV / TV box can Install a sofa butler, watching high-definition TV broadcasts and HD free movie on demand.
1.ANTENK Wire to Board connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.
2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so on
Antenk Wire To Board Connectors Ranges:
Power Wire to Board
IDC Wire to Board
Locking Wire to Board
Latching Wire to Board
Fine Pitch Wire to Board
Wire to Board Connectors Information
Description
Wire-to-board connectors are used to interconnect printed circuit boards (PCBs) by using connectors attached to wires.
Specifications
Specifications for a wire to board connector include the following.
Wire-entry angle - There are three wire-entry angle styles: vertical, right-angle, and bottom-entry.
Wire size - Wire size is usually measured in American wire gauge (AWG), a standard for non-ferrous wire conductor sizes. The term "gauge" refers to the wire`s diameter. The higher the gauge number, the smaller the diameter and the thinner the wire.
Circuits or positions - With wire to board connectors, the number of circuits or positions may range from 1 to 120.
Pitch or center spacing - Pitch or center spacing is measured in millimeters (mm) or inches.
Lock to mating style - There are three basic lock-to-mating styles: positive, friction, and friction ramp.
Maximum current - The maximum current or current-carrying capacity is measured in amperes (A) and ranges from 1.0 A to 50. A.
Termination Methods
Crimp is the physical compression of a contact wire around a conductor to make an electrical and mechanical connection. Insulation displacement connectors (IDC) slice through the cable insulation to make a connection. Choices for termination method also include cage clamp, screw, tabs, and solder cups.
PCB Mounting Styles
With wire to board connectors, there are four choices for PCB mounting.
Through-hole technology (THT) mounts components on a PCB by inserting component leads through holes in the board and then soldering the leads in place on the opposite side of the board.
Surface mount technology (SMT) adds components to a PCB by soldering component leads or terminals to the top surface of the board. SMT components have a flat surface that is soldered to a flat pad on the face of the PCB. Typically, the PCB pad is coated with a paste-like formulation of solder and flux.
Press-fit and compression-style Board To Board Connectors are also commonly available.Wire to Board Connectors Information
Standards
Wire-to-board connectors carry approvals from various national and international organizations. In North America, they often bear marks from Underwriters Laboratories (UL) and/or the Canadian Standards Association (CSA).
A wire to board connector for the European marketplace should comply with the Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives from the European Union (EU). Wire-to-board connectors that comply with other requirements are also available.
BS 9526 N0001 - Specification for multi-contact edge socket electrical connectors.
Wire To Board Connectors,Wire Harness,Pcb Wire To Board Connector,Pin Wire To Board Connector,IDC Wire to Board,Locking Wire to Board,Latching Wire to Board,Fine Pitch Wire to Board
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com