Kangping curtain wall convection radiator, using high-quality galvanized steel shell, fine spray anti-aging coating, high-density copper tube, after 100% eddy current inspection, the radiator copper tube is machined with aluminum sheet processing, copper tube interface It is protected by special non-oxidizing gas, and its working pressure is up to 2.0Mpa. It is corrosion-resistant and maintenance-free.
It is suitable for use under large-scale glass curtain wall such as large exhibition halls, airports, commercial centers, etc. It has the characteristics of fast heating, anti-condensation, and improved cold bridge of curtain wall to maintain constant indoor temperature.
Product installation instructions
1. Unpack and remove the mask.
2. Determine the installation height according to the height of the curtain wall radiator and adjust the top of the radiator to the ground level.
3. Use the impact drill to make the mounting hole at the installation position, and then fix the heater foot with the M8 expansion bolt.
4. The radiator inlet pipe must be equipped with manual or automatic temperature control regulating valve to adjust the radiator water flow and balance system resistance. Each household inlet and return water pipeline must be equipped with a total valve for future maintenance.
5. After the installation is completed, open the water supply system, open the exhaust valve at the copper joint until the hot water passes, evacuate the air in the water system, then tighten the exhaust valve and install the radiator cover.
Battery Charger,ebike battery charger,ebike charger,water purifier charger
FOSHAN SHUNDE KELICHENG POWER SUPPLY TECHNOLGY. CO,LTD , https://www.kelicpower.com