General installation height of switch sockets - Solutions - Huaqiang Electronic Network

Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle
MOS power IC full range
KKST patch plug-in active passive crystal oscillator hot sale 24.576000MHZ

The power switch is generally between 120 cm and 135 cm above the ground (the general switch height is as high as the adult's shoulder);
Wall sockets for audio-visual equipment, desk lamps, wiring boards, etc. are generally 30 cm from the ground (the living room sockets are based on TV cabinets and sofas);
The socket of the washing machine is 120 cm to 150 cm above the ground;
The socket of the refrigerator is 150 cm to 180 cm;
The sockets for air conditioners, exhaust fans, etc. are 190 cm to 200 cm from the ground;
The kitchen function socket is 1100 high from the ground and has a spacing of 600;
The European stripping position is generally suitable for the vertical coordinate set at 2200mm from the ground, and the abscissa can be set in the middle of the left and right lengths of the smoking machine itself, so that the power plug and the stripped back wall portion are not touched, and the socket is located at the center of the stripping duct;

DIP Type Inductor

DIP Power Inductor is a small choke coil power inductor. It has a wire wound on the core(magnetic or air), with leads attached to it for through-hole mounting. The feathure is Low DC resistance, high current handling capacities, wide range of inductance which is best for the power supply line. It widly used for noise filter, motor controller and switching power supply,LED lights, Adapters,Electrical ballasts,DC-DC converters, TVs, VTRs, personal electronics, home appliances, ect.


An inductor is a passive electronic component which is capable of storing electrical energy in the form of magnetic energy. Basically, it uses a conductor that is wound into a coil, and when electricity flows into the coil from the left to the right, this will generate a magnetic field in the clockwise direction.


power inductor power inductor

Ferrie Drum Core inductor

Components : Ferrite core, Copper wire;Tube,Lead wire

Core : Ferrite core-NiZn

Wire : Enameled copper wire-UEW/PEW

Tube : UL heat-shrinkable tube/PVC

Lead wire : Tinned copper wires

Glue : Epoxy Resin

Functions

Energy Storage; Filtering; Voltage Step-up; Resonance

Coil Structure

Drum type; Tubby type

Characteristics

Working Frequency Range Above 1KHZ

Inductance Range 1uH-1H

DCR Range unknown-Depend on customers' request

Storage Temperature -20℃ to +85℃

Working Temperature -20℃ to +105℃

Storage Humidity 30% to 95%

Available in E12 Series

Small diameter of only 5.8 mm maximum

Profile of 4.8 mm

Test Items

Turns Ratio

Inductance

DC resistance test

Safety test

Current test

Applications

1. Digital Products:Digital camera ETC

2.Household Appliance:washing machine,air condition,air purifier,coffee maker, bread maker ETC

3. Security products:Camera,Voice recording equipment,memory device,infrared devices,alarms ETC

4.Switching power supplies for portable communication equipment, LCD TVs, car radios, camcorder, UPS ETC

5.Lighting industrial: LED drivers

6.Auto electronics: Navigator,Data recorder, Car charger ETC

7.Toys:electric toys, remote controller ETC

8.Motors

9 Input / output of DC/DC converters

DIP inductor

DR inductor
DR inductor

drum core inductor drum core inductor power inductor drum core inductor

Dip Type Inductor,Custom Power Inductor,Power Choke Inductor,Ferrite Core Power Inductor

Shaanxi Magason-tech Electronics Co.,Ltd , https://www.magason-tech.com

Posted on