Intro:Takfly 12 fibers MPO/MTP hydra cable assemblies is with one single 12 fibers MPO/MTP connector end and LC connector for other end. This patchcord needs to be installed inside of the module cassette, connecting the backbone cable with the equipment, which can be modularized and plug play. Compared with traditional splicing, it's dramatically improve the work efficiency and brings convenience.
Parameter:Standard Insertion Loss:SM≤0.7dB;MM≤0.5dB; Low Insertion Loss: SM≤0.35dB;MM≤0.35dB; Return Loss (dB):SM≥60 (APC);≥50 (PC);MM≥30 (PC)
Application:Data Center Infrastructure; Optical system access network; Storage Area Network- Fiber Channel; 40G and 100Gbps Fiber Network; High density architectures
Product details:
12 fibers MPO/MTP hydra cable assemblies is with one single 12 fibers MPO/MTP connector end and LC connector for other end. This patchcord needs to be installed inside of the module cassette, connecting the backbone cable with the equipment, which can be modularized and plug play. Compared with traditional splicing, it's dramatically improve the work efficiency and brings convenience.
Features:
100% tested, high quality and reliability
Low insertion loss
Special specification available upon custom request
Utilize MPO/MTP Connectors
Rapid Deployment
Factory terminated
High density cable
Optimized performance
MPO connector complies with IEC-61754-7& EIA/TIA-604 -5
 Application:
Data Center Infrastructure
Optical system access network
Storage Area Network- Fiber Channel
40G and 100Gbps Fiber Network
High density architectures
Performance of Assemblies: MPO/MTP Termination:
Fiber Type |
Single Mode |
Multi-mode |
Standard Insertion Loss(dB) |
0.7 |
0.5 |
Low  Insertion Loss(dB) |
0.35 |
0.35 |
Return Loss(dB) |
≥60(APC) |
≥30(PC) |
≥50(PC) | ||
Tensile  Strength(kgf) |
10 |
|
Durability(dB) |
≤0.2   500 matings |
|
Working  Temperature(ºC) |
-40 ~+85 |
|
Testing  Wavelength(nm) |
1310/1550 |
850 |
Generic Connector Termination:
Fiber Type |
Single Mode |
Multi-mode |
|
Parameter |
UPC |
APC |
UPC |
Insertion  Loss Maximum (dB) |
≤0.3 |
||
Return Loss (dB) |
≥50 |
≥60 |
≥30 |
Durability  (dB) |
≤0.2   500 matings |
||
Working  Temperature(ºC) |
-40 ~+85 |
||
Testing  Wavelength (nm) |
1310/1550 |
850Â |
|
Â
Why choose Takfly ?
Service:
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control:
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantage:
1.15 years experience in manufacturing fiber optic products..
2.Availability of RÂ & DÂ with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 worker
7.Excellent service
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirmation.
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen, HK or other ports as you required.
5.Shipping term: EXW or FOB
Shipping:
1.Once confirmed the order, and payment sent after finishing goods.
2.Goods will be sent within 7Â days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because  of wrong address.
If any interested, more products specification as well as price, sample will be sent for your evaluation!
Â
Intro:Takfly 12 fibers MPO/MTP hydra cable assemblies is with one single 12 fibers MPO/MTP connector end and LC connector for other end. This patchcord needs to be installed inside of the module cassette, connecting the backbone cable with the equipment, which can be modularized and plug play. Compared with traditional splicing, it's dramatically improve the work efficiency and brings convenience.
Parameter:Standard Insertion Loss:SM≤0.7dB;MM≤0.5dB; Low Insertion Loss: SM≤0.35dB;MM≤0.35dB; Return Loss (dB):SM≥60 (APC);≥50 (PC);MM≥30 (PC)
Application:Data Center Infrastructure; Optical system access network; Storage Area Network- Fiber Channel; 40G and 100Gbps Fiber Network; High density architectures
Product details:
12 fibers MPO/MTP hydra cable assemblies is with one single 12 fibers MPO/MTP connector end and LC connector for other end. This patchcord needs to be installed inside of the module cassette, connecting the backbone cable with the equipment, which can be modularized and plug play. Compared with traditional splicing, it's dramatically improve the work efficiency and brings convenience.
Features:
100% tested, high quality and reliability
Low insertion loss
Special specification available upon custom request
Utilize MPO/MTP Connectors
Rapid Deployment
Factory terminated
High density cable
Optimized performance
MPO connector complies with IEC-61754-7& EIA/TIA-604 -5
 Application:
Data Center Infrastructure
Optical system access network
Storage Area Network- Fiber Channel
40G and 100Gbps Fiber Network
High density architectures
Performance of Assemblies: MPO/MTP Termination:
Fiber Type |
Single Mode |
Multi-mode |
Standard Insertion Loss(dB) |
0.7 |
0.5 |
Low  Insertion Loss(dB) |
0.35 |
0.35 |
Return Loss(dB) |
≥60(APC) |
≥30(PC) |
≥50(PC) | ||
Tensile  Strength(kgf) |
10 |
|
Durability(dB) |
≤0.2   500 matings |
|
Working  Temperature(ºC) |
-40 ~+85 |
|
Testing  Wavelength(nm) |
1310/1550 |
850 |
Generic Connector Termination:
Fiber Type |
Single Mode |
Multi-mode |
|
Parameter |
UPC |
APC |
UPC |
Insertion  Loss Maximum (dB) |
≤0.3 |
||
Return Loss (dB) |
≥50 |
≥60 |
≥30 |
Durability  (dB) |
≤0.2   500 matings |
||
Working  Temperature(ºC) |
-40 ~+85 |
||
Testing  Wavelength (nm) |
1310/1550 |
850Â |
|
Â
Why choose Takfly ?
Service:
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control:
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantage:
1.15 years experience in manufacturing fiber optic products..
2.Availability of RÂ & DÂ with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 worker
7.Excellent service
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirmation.
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen, HK or other ports as you required.
5.Shipping term: EXW or FOB
Shipping:
1.Once confirmed the order, and payment sent after finishing goods.
2.Goods will be sent within 7Â days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because  of wrong address.
If any interested, more products specification as well as price, sample will be sent for your evaluation!
Â
X3 LED Headlight,X3LED Headlight Bulbs,Quality X3 LED Headlight,X3 LED Headlight Upgrade
LED Headlight LED Fog Light Co., Ltd. , http://www.nbledheadlight.com