One month ago, I saw that Fujifilm had to release a new machine on Fuji official micro. I heard it was X-E3 and I was happy for a long time. Until September 7, Fuji officially released the XE series of the latest camera X-E3. Looked at the conference's new machine, the weight of 337g, the third-generation 2400W pixel X-Trans CMOS sensor, 325-point autofocus system, good focus tracking performance, Bluetooth support, touch screen, compared to other models in the market Saying that the cheaper prices are all making me excited.
On September 19th, Fuji officially opened its booking, so it was scheduled for the first time. This is also my fifth Fuji fuselage. I used X-M1, X-E2, X100T, and X-T1 carbon crystal ash before, and it gave me a good impression of Fuji. The day before yesterday X-E3 took over the position of X-T1. This is the first time I used Fuji's third generation machine. I played a bit yesterday and shared my own feelings. Because the X-T1 has already been shot, there are no other cameras on the hand to take pictures. The photos are taken by the iPhone SE and the iPhone 5c.
"Unpacking"
Buy the X-E3+XF 23 F2 WR kit
The black packaging is still the familiar taste.
Because it is the first time to buy, so the accessories are still quite a lot to send, basically all the accessories are aligned, such as the original leather case, wristband, memory card, UV, the second battery, clean suits, etc. For the first time It is undoubtedly a good news for a friend with a camera to save a lot of trouble. It seems that Fuji's promotion efforts are still quite large.
There is a large black flannel in the original leather case that comes with it. I am not very clear why it is. Is it used to give the user a background photograph?
I have seen the thickest manual, and I think no one would seriously read over 300 pages.
The all-black version of the purchase, because before using the silver version of the X-E2, that silver paint has no texture on the photo, or black look good.
There are two Fuji lenses on the hand, one XF14mm F2.8 and one XF 35mm F2. The 23mm set of machine belts is now not in the hand.
After putting on the lens
XF14mm F2.8
XF 35mm F2
Leather case
Both lenses are representative of Fuji's compact lenses, so there is no sense of disobedience. With the new focusing system, the focusing speed is much faster than that of the previous X-T1. It is fast and resolute, even the XF14mm focusing sound. Are very subtle.
At the top of the machine, the dial is one less than the X-T1, and you cannot adjust the ISO, and the shooting mode or metering can not be achieved through the dial, just get the hands is still not used, after all, X-T1 dial The disk is really convenient.
The front face of the camera, the camera skin is hard, feels like plastic, and the skin of the X-T1 is completely two kinds of feeling. However, the metal body is still praised, and the texture is very good.
Compared to the X-E2 pop-up flash, the X-E3 has eliminated this setting and uses the same external flash as the X-T1. Like the X-T1, it has an EF-X8 flash.
I have very few needs for the flash, amateur photos to take the flash, ha ha ha, this compact flash is still good, emergency is enough!
Bringing a good feeling
USB and HDMI connectors on the left side of the camera
bottom
This is actually not Made in Jepan. Isn't Fuji's mid-to-low-end machine now made in Japan?
Battery slot, SD card and battery together, unlike the X-T1 on the right side of the camera. And still can only put a memory card.
W-126S battery, compared to the previous one more S, life should be improved, but before the X-T1 deputy factory battery can still continue to use, this point is still quite good.
Compact size storage is also very convenient
"About screen"
This time, the X-E3 uses a touch screen. For the first time, Fuji's touch screen is used to make it feel real. When browsing photos, it's pretty good, and there is no difference between mobile phones and multi-touch. The gesture function when taking pictures is still not very sensitive. For example, when filming from the right side, the film analog settings are called out, but often it will not work. It is necessary to try several times to display the menu. It is not known if the firmware update will be better after Fuji.
In addition, because of the addition of joysticks, the X-E3 canceled the arrow keys, using the joystick instead, at the beginning may be somewhat unaccustomed to, but it feels good to use a few more times, the key is that the choice of focus will be too convenient !
"About Viewfinder"
The viewfinder feels very small, much smaller than the X-T1, and it just doesn't fit in with the changeover. Friends who need a large viewfinder still have to think carefully.
"About Bluetooth Connection"
As Fujifilm's first camera with Bluetooth, this feature is naturally to experience. But the actual experience can not be used, with the new Fujifilm Cam Remote, you can use Bluetooth and mobile phone pairing, but not enough to remote control or accept photos, still have to use WIFI for these operations. The red box in the following figure shows that Bluetooth has been linked, but it still shows that you need to use WIFI to connect. Do not know the cause of the iPhone or the camera's firmware, you need to study, the official website has not yet provided a new firmware to download.
"About RAW photos"
I don't know if this is the reason for the new camera. Lightroom can't read X-E3's RAW format photos. It's a bit sad. Waiting for the Lightroom update doesn't know how long it took. For the time being, it hasn't found a way to read RAW photos.
"About proofs"
Only to get the camera, there is no time to go out to shoot, take a few hands, are the original, no adjustment, what you see is what you get. Poor technology, let's look straight out of color, right when the detoxification film.
Classic chrome mode, white balance-2, -2
Astia mode
Velvia mode
"to sum up"
advantage:
24 million pixels larger than the previous 16 million
2. The focus speed increases greatly
3. Light and simple
4. Touch screen to browse photos conveniently
5. Easy to operate joystick
insufficient:
1. Viewfinder size is too small
2. Insensitive touch screen gestures
3. Bluetooth connection is not available
4. Non-Made in Japan (I don't know if it shouldn't be a disadvantage)
5. Mainstream software does not support X-E3 RAW files
The two-day preliminary experience probably only had such subjective feelings on this camera. Many functions are not yet familiar, and you have to slowly explore it in the future. In short, this is a machine to give a clear distinction between advantages and disadvantages. If you want to buy Fuji's third-generation machine, the budget is not a lot and you don't like the X-T20 model. You can choose this machine. He should not disappoint you.
In the end, what should you say? Abdominal muscle Nanbo Bay.
Personal Center screenshot
ZGAR FILTER TIP
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.
We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.
Vape Filter Tip,Disposable Pod Vape,Disposable Vape Pen,Disposable E-Cigarette,Electronic Cigarette,OEM vape pen,OEM electronic cigarette.
ZGAR INTERNATIONAL TRADING CO., LTD. , https://www.zgarvape.com