Product introduction:
GH-6600C cable outer sheath tester meets the national standard GB50150-2006 cable outer sheath withstand voltage test regulations, including cable outer sheath handover test and preventive test suitable for cross-connected system and fault location of cable outer sheath . GH-6600C cable outer sheath tester quickly and accurately finds 10kV-500kV single-core and three-core high-voltage, ultra-high-voltage cable outer sheath ground fault and large leakage current, and can also be used for high-density polyethylene and polyvinyl chloride. The outer sheath of the cable is subjected to a DC withstand voltage test of 5kV-10kV for 1 minute.
Product nickname:
GH-6600C cable outer sheath tester Features:2. Overload protection by digital sampling and microcomputer control of voltage and current;
3. Low power fault location to avoid damage to adjacent lines or cables;
4. The cable outer sheath tester displays the voltage and current and the operation prompt through the large screen liquid crystal;
5. The automatic discharge device provides the function of removing residual charge and grounding the test piece;
6. One machine is multifunctional, easy to operate and safe.
7. Effectively solve the problem of PVC PVC cable and copper-free shielded low voltage cable with poor wave propagation characteristics.
8. The test voltage is subdivided into 1000V, 2000V, 5000, 10000V four gears, suitable for cables of different voltage levels.
9. Cable outer sheath tester has no blind zone in the measurement range.
10. The cable outer sheath tester is suitable for the fault pre-positioning of 380V-220kV high, medium and low voltage power cables.
11. Appropriate for the 380-1000V cable step voltage method.
12. The cable outer sheath tester is suitable for the pre-positioning and fine determination of the 66kV-220kV cable outer sheath fault.
13. The high voltage generator is also a cable fault converter that converts difficult high impedance faults up to 500 MΩ into low impedance faults.
Technical Parameters:
1. Cable outer sheath tester transmitter2. Power source: AC220V±10% 5A;
3. Working mode: continuous output, intermittent output, withstand voltage test
4. Output voltage: 0∽10kV negative polarity continuously adjustable output voltage, divided into four voltage ranges: 1000V, 2000V, 5000V and 10000V;
5. Output current: continuous DC 0~500mA, intermittent DC 0 ~ 1A
6. Safety: Over-voltage and over-current automatically prompt and return to zero.
7. Volume: 350 × 320 × 370
8. Weight: 18Kg
9. Receiver working mode: DC input, AC input two modes
10. Ammeter: Active Amplifier
12. Sensitivity: 0.50mV
13. Power: 6 × 1.5V
14. Volume: 120 × 120 × 230
HVE series hood is suitable to small heavy duty connectors, it is widely used in machinery, wind energy, rail transportation, power systems, photovoltaic industry, communications industry, engineering equipment and other fields. Heavy Duty Connector is designed for modular production pre-wiring and satisfying severe environmental conditions, applied in rail transit,industrial automation and equipment manufacturing fields. Compared with traditional wiring methods,use of heavy duty connector can reduce site wiring operation after equipment or vehicle leaves the workshop,enhance production efficiency and reduce quality risk of site wiring.
Hve Series Connector,Rectangular Electrical Connector,12 Pin High Voltage Connector,8 Pin Heavy Duty Connector
Kunshan SVL Electric Co.,Ltd , https://www.svlelectric.com