China Electric Power International Co., Ltd. Announces the Second Announcement of the Tender for the Seven Batches of Production Lines in 2016

Tender No.: Tender Notice No. Tender Code: CBL_20161115_188855350
Bulletin category: Domestic tender

Tenderer: China Power International Co., Ltd. Source of funding: Other China Electric Power International Co., Ltd. 2016 seven batches of production line items (Pingyin second ultra-low row) tendering secondary announcement Tender Notice commissioned by the tenderee on China Power International In 2016, seven batches of production line items (the Pingyin No.2 ultra-low row) were publicly tendered.
I. Basic information of the project Tenderee: China Power International Co., Ltd.

Project Location: Huainan City, Anhui Province Source of Funding: Self-financing by the company

No.

Tender number

Section name

main indicators

Bidding Document Price (yuan)

1

F02000212SZ02WZ058-120540000002

02-Ultra low-emission retrofit project for Pingdingji No. 2 Power Plant: Denitrification to increase flue gas heater retrofit EPC general contracting

Design, production, supply, installation, commissioning, technical service and final delivery of denitrification flue gas heaters.

1000.00

2

F02000212SZ02WZ058-120540000004

04-The construction of the catalyst for Pingyuan Second Electric Reserve

The catalyst spare layer construction and related equipment installations include sonic soot blowers, initial layer catalyst inspection and replacement, and denitrification system internal defect treatment.

1000.00

Third, bidder qualification requirements (a) basic qualification requirements
1. There should be legal personality for the independent conclusion of the contract. The person in charge of the unit (legal representative) is the same person or a different unit that has a controlling or management relationship may not bid on the same bid; for bids in the same project where there is mutual restraint (such as supervision and supervision), the person in charge of the unit (Different legal representative) is the same person or different units that have controlling or management relationships may not bid on the corresponding section of the same project.
2. Should have the same or similar project designing, manufacturing, or construction requirements as the tendering target and the corresponding qualifications requirements; the required expertise, funds, equipment and facilities, personnel organization, management capabilities, and performance experience required to complete the project. No significant quality problems and safety problems have been found during the construction, installation, commissioning and operation, or effective measures have been taken to improve the problems that have occurred.
3. The company shall have a sound quality assurance system and must hold a certificate of ISO9000 quality assurance system issued by a qualified organization recognized by the state.
4. In the past 3 years, there have been no cases of fraudulent bid winning, serious breach of contract, etc. due to their own reasons. The record of serious bad behaviors of suppliers during the non-disposal period of China National Power Investment Corporation or China Power International Co., Ltd.
5. Operating conditions are good, at least 2 years profitable in the past 3 years; have good credit standing and business reputation, are not being ordered to suspend business, property is taken over, frozen, bankruptcy; bid qualification has not been suspended or cancelled. (Bidders are required to provide audited main financial statements and bank credit status documents in the past three years. They are required to provide information on current lawsuits or lawsuits issued by higher authorities or legal affairs departments for the current or nearly three years or no lawsuits. letter.)
6. The bidder (or the unit engaged in construction) shall have a safety production license within the valid period issued by the safety production supervision and administration department or the construction competent department. (This section applies to tenders that require construction qualification)
7. There have been no major safety incidents in the past 3 years, or no major safety accidents in the past 3 years, or no major safety accidents in the past 1 year, or within the last 1 year in the National Power Investment Group. The company’s internal system unit has not experienced a general production safety personal death. (The bidder shall provide the safety accident report approved by the municipal government's production safety supervision and management department or the construction authority in the past three years.) (This section applies to construction companies.)
8. Domestic equipment, materials, domestic manufacturers can directly sell, do not accept the agency's bid and quote. Imported equipment, materials, foreign manufacturers in the country have sales, service representative agencies can sell directly, in principle, do not accept the agency's bids and quotations.
9. Does not accept the Commonwealth bid.
(II) Special qualification requirements

No.

Section name

criptION">Specialty

1

02-Ultra low-emission retrofit project for Pingdingji No. 2 Power Plant: Denitrification to increase flue gas heater retrofit EPC general contracting

1. The bidder has the special equipment design license of the People's Republic of China (pressure vessels D1, D2 level) and the People's Republic of China special equipment manufacturing license (pressure vessels A1, A2 level). The foundation and steel girder reinforcement designers have the steel structural design verification qualification and the flue gas heater designers should have design experience with high temperature smoke ducts (650°C).

2. The bidder shall provide the same performance as the project, provide at least one similar performance, and issue a copy of the good operation certificate of the power plant and a copy of the cover and signature page of the valid contract; or at least one high-temperature flue gas heat exchanger (not less than 650°C) The successful transformation of the performance, and provide a copy of the good operation certificate issued by the owner and the cover and signature page of the valid contract.

3. The construction unit responsible for this transformation must have experience in power-related installations and strong technical force. It should have professional qualifications for contracting mechanical and electrical equipment installation projects of level 3 or above, and have an effective safety production license. The bidder provides candidates for construction, and the tenderee confirms that the qualifications of the construction unit and other relevant materials must be submitted to the tenderer for approval.

2

04-The construction of the catalyst for Pingyuan Second Electric Reserve

1. The bidder shall have the qualification of professional contractor of mechanical and electrical installation engineering with level 3 or above.

2. The bidder shall provide two domestic performances of denitrification for 600MW and above units within 5 years, and provide a copy of the effective contract cover and signature page. Otherwise, its bid document will be considered invalid.

IV. Issues on the Offering of Bidding Documents (I) Time and Place of Sale of Bidding Documents
From November 15 to November 21, 2016 (excluding official holidays), from 9:00 to 11:30 in the morning and from 13:30 to 17:00 in the afternoon.
(2) The price of the bidding documents shall be paid for the bidding documents in order to purchase the bidding documents. For the details of the bidding documents, please refer to the “List of Tender Bid Sections”. The bidding documents are purchased voluntarily. Once sold, the fees will not be refunded. Bidders who have not purchased bidding documents may not participate in bidding.
(3) The way of selling tender documents will be on-line and it will not accept on-site purchases. (.)
1. Purchase the bidding documents to perform the following operations: 1. The netizen login → 2. Search announcement → 3. Check the details of the announcement → 4. Select the participation bid, fill in the online “Buy Bidding Document Application Form” → 5. Pay the bidding document fee. Please refer to the website's operating instructions for the purchase of tender documents.
2. Payment method: UnionPay online payment.

Contact: Zhang Jie

Mobile:

phone

fax

E-mail:

In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.

Hall Closed Loop Current Sensor

Hall Closed Loop Current Sensor,Closed Loop Current Sensor,Hall Effect Current Transducers,Closed Loop Hall Current Sensor

Zibo Tongyue Electronics Co., Ltd , https://www.tongyueelectron.com

Posted on