How to change the LED display ? Many friends have such doubts. Here is the question of how to change the LED display. The engineer has something to say. First of all, you must know how the LED display changes the font. There are usually three ways: serial cable, USB flash drive, mobile phone (or remote control).
According to the corresponding operation mode, it is possible to operate the LED display.
1. Change the word through the serial cable
Connect the LED display and computer, open the display control software, set the screen parameters, edit the font of the program, click Send to
2. Change the word through the U disk
There is a column in the software menu, click USB download, save the setting parameters and contents to the USB flash drive. When changing the program, copy the content directly to the LED display and replace it with the USB flash drive.
3. Change the word by mobile phone (or remote control)
Edit SMS to send and change ad captions
Warm reminder: LED display generally transmits data with USB interface and COM interface. You choose the USB interface to transfer data to modify the display content, like the common ledshow2012, ledplay software (free download), and then modify it in the software. And set the screen parameters (this is related to the control card of the LED display). Then click USB to download the downloaded content to the USB flash drive. Then connect the USB flash drive to the U port of the display.
The above is how to change the LED display, I hope to help everyone, if you can't change the word, then please contact your LED display product service provider.
Fiber Reinforced Composite Material
Fiber Reinforced Composite Material,Hard Composite Graphite Fiber Felt,Vacuum Furnace Heat Insulation Ring,Insulation Material For Vacuum Furnace
HuNan MTR New Material Technology Co.,Ltd , https://www.hnmtr.com