Smart home phone remote controller installation and operation

1. Installation connection (HH501 telephone remote controller)

(1) Connect the telephone remote controller to the telephone, that is, insert the plug of the telephone line into the corresponding hole.

(2) The power plug of the electrical equipment is plugged into the output power socket on the panel of the HH501 telephone remote controller. There are a total of 1, 2, 3 three sockets, that is, three devices can be operated at the same time.

(3) Turn on the power of the telephone's remote controller. After the connection is complete, wait for the operation.

2. Remote operation (HH501 type telephone remote controller)

(1) Use a landline or mobile phone to dial the telephone connected to the telephone remote controller. After the bell rings five times, the prompt “Please enter the password” will appear; dial the six-digit password through the keypad on the fixed line or mobile phone, and press the # sign to end.

(2) Then the prompt tone “please enter the device number” (refer to the electrical devices on the three outlets of 1, 2 and 3), if the device on the operation 1 socket dials 1#, the same 2 sockets dial 2#, 3 outlet dial 3 #.

(3) The tone "o power, 1 power off, 2 inquiries" appears again. For example, dial “o” to power on the socket, and the corresponding indicator lights up; dial “1” to power off and the indicator lights off; dial “2” to indicate whether the socket is currently “on” or "Power off state."

(4) When the operation is correct, a voice prompt “Operation is successful” will be heard, and a new round of voice prompt “please enter the device number” will appear to continue the operation.

1) When the operation is completed, after 25s, the system will automatically hang up to end the operation.

2) At any time, you can press step “2” to check the working status of the socket.

3. Local operation (HH501 telephone remote controller)

(1) Pick up the phone.

(2) Press the control button on the right side of the remote controller of the telephone; immediately hear the prompt tone "please enter the device number"; enter "1#" or "2#" or "3#"; prompt tone "o power, 1 power off, 2 inquiries"; input "0" or "1" or "2"; operate the on and off states of three devices with zero distance, and also see the indicator lights of the corresponding outlets on and off to judge the corresponding Whether the outlet is powered on or off. After the operation is over, you will hear the "please enter the device number" for the next operation until the operation is completely over.

4 parameter settings

(1) After the tone "please enter the device number", enter "*#" to indicate the parameter setting.

(2) In the command format, you can change the password (6 digits), modify the number of dial-in rings (01-99 times), and modify the automatic hang-up time (5-25s).